Philips 42PF9630A/37 Manual page 19

Cl0ck
Clock
This allows you to use your TV as a clock.
Note:Adjusting the clock is necessary for the correct working of Instant record (See
use of the remote control, p. 7) and Loci< after (See TV settings, Channels, p. 24)
features,
Auto clock mode
O Select Clock in the Setup menu.
O Press the cursor right to select the Auto clock mode.
Press the cursor right to instruct the TV to get the time automatically or
manually.
Auto clock channel (only ow;iloble when Auto clock mode is set to Automatic)
With the cursor buttons, select the channel number where time can be
found by the iV. Typically time can be found on PBS as well as some other
channels.
Time = Day (only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day.
If Auto clock mode Manual has been selected, and no clock search has
been done, the system will keep the entered time and day.
Ti me zone (only ow;iloble whenAuto clock mode is set to Automatic)
This function allows you to select your local time zone. Broadcasted time
information will correct the clock display for your local time.
Select Time zone with the cursor down.
Press the cursor right to select your local time zone.
Daylight saving (only ow;iloblewhen Auto clock mode is set to Automodc)
Daylight saving time is automatically set by specially broadcasted signals.
This menu item allows you to disable the automatic setting of daylight
saving time.This is useful if you live in an area or state where daylight saving
is not applied, but you receive channels from other areas where daylight
saving signals are broadcasted.
Select Daylight saving with the cursor down.
Press the cursor right to select Automatic for automatic clock correction
for daylight saving time, based on specially broadcasted signals.
O Select Off to disable automatic clock correction based on the specially
broadcasted signals.
17