Table of Contents
Advertisement
FEATURES
Eight channel mixer controller.
Provides physical controls for the DM-80's internal mixer.
Fader, Pan and EQ functions for each input.
Two pairs of auxiliary inputs.
Master output faders
All adjustments to the DM-80-F are immediately transmitted to the DM80.
All actions on the fader unit are recorded by the compu mixer.
PRECAUTIONS
POWER SUPPLY
CARE
OTHER
COPYRIGHT
Do not connect the DM-80-F to anything other than the DM-80-4 or
DM-80-8 rack mount unit or the DM-80-R Remote Unit.
For everyday cleaning, wipe the unit with a soft dry cloth, or one that
as been slightly dampened with water. To remove stubborn dirt use a
mild neutral detergent. Afterwards be sure to wipe the unit thoroughly
with a soft, dry cloth.
Never use benzene, thinner, alcohol or solvents of any kind to avoid
the risk of discoloration or deformation.
Do not subject the DM-80-F to strong shocks.
The DM-80-F may produce some heat when operating normally.
Do not subject the unit to temperature extremes (e.g.. direct sunlight in
an enclosed vehicle). Avoid using or storing the unit in dusty or humid
areas or areas that are subject to high vibration levels.
This unit may interfere with radio or television reception. Do not
operate in the vicinity of such receivers.
Do not allow objects or liquids of any kind to penetrate the unit. In the
event of such an occurrence, discontinue use immediately. Contact
qualified service personnel as soon as possible.
Should a malfunction occur (or if you suspect there is a problem)
discontinue use immediately. Contact qualified service personnel as
soon as possible.
Copyright ©1991 by ROLAND CORPORATION. All rights reserved.
No part of this publication may be reproduced in any form without the
permission of ROLAND CORPORATION.
Apple and Macintosh are registered trademarks of Apple Computer,
Inc., USA.
ROLAND DM-80-F FADER UNIT « USER MANUAL
3
Advertisement
Table of Contents
