Charging From The Wall; Using Your Power Station - GOAL ZERO YETI 300 User Manual

Charging from the Wall

Plug your Yeti into any wall outlet. You will know it is charging when the blue LED
light next to the input port turns on, and battery segments in the battery display
are blinking. The power station is fully charged when all battery segments stop
blinking and remain solid.
NOTE: For additional charging options such as car charging, visit
www.goalzero.com/shop/yeti-accessories.
6

Using Your Power Station

DOWNLOAD THE GOAL ZERO APP AND UPDATE YOUR DEVICE
The Goal Zero app makes it easy to control your Yeti, adjust settings, and monitor
your power usage. Download it from your app store, then follow the instructions in
the app to pair with Wi-Fi and set up your power station. The app will also prompt
you with any new firmware updates. Please make these updates before using your
device for optimal performance.
HOW TO USE YOUR YETI POWER STATION
1. Press and hold the power button on the back of the unit for 2 seconds until the
display turns on.
2. Press the button located above each port to power that specific port. When
not using certain ports, turn them off to conserve power.
3. You'll know the port is turned on when the white LED light on the button is
illuminated.
4. Plug in your devices. The Yeti will not turn off automatically if a port is left
turned on, even when no load is present. This prevents shutdown when
intermittent or very low power loads are used.'
You can charge your Goal Zero Yeti and power devices simultaneously. If possible,
keep your Goal Zero Yeti plugged into a power source when not in use, or plug into
an AC power source every 12-18 months to keep battery fully charged.
Best-Use Strategy
When charging equipment with your Yeti, take note of the LCD Battery Display. If
you plug in devices that have a high power requirement, the charge level can drop
very quickly. When using the AC power output, the power station will be converting
the energy from the DC power of the battery to the AC power needed by your
device. Although your power station has a highly efficient inverter, there is still
some energy lost in the conversion and you may not get the full rated capacity of
the battery. If you're experiencing shorter runtimes, you may want to check the
device's power requirements.
Cold Weather Usage
Cold temperatures (below freezing) can impact the power station's battery
capacity. We recommend keeping your Yeti power station in a temperature-
controlled environment for best performance.
7