Advertisement
Disc playback
LD/CDV/CD
|
Front panel buttons and remote control unit buttons with the seme
DISC SIDE A
name or mark have the same function.
DISC SIDE B
5
6
Load a disc.
Start playback.
As shown in the following diagram, place the disc on the disc table in the
PLAY/PAUSE
groove corresponding to the size of the disc.
If the disc is not centered correctly on the disc table, the disc will not be
:
mitt
played or the disc or the player may be damaged.
Always place the disc correctly according to the required disc size on the
8emCcD
ae
20emLD
Remote contro! unit
30cm LD
2
@ With CDV discs, the video part is
played first.
e@ With the surround
function (+
p.22), you can select the desired
atmosphere
to match
the disc
genre, such as movie or music.
To specify and play a single side (side A or side B)
Precautions concerning disc loading
To play side A only, press SIDE A instead of PLAY/PAUSE. Side Awill
@
Do not place more than one disc on the disc table.
If two discs
be played and then playback will stop.
are placed one on top of the other on the disc table, discs may
To play side B only, press SIDE 8 instead of PLAY/PAUSE. Side B will
be scratched and/or malfunction may occur.
be played and then playback will stop.
@
With this unit, playback of all types of discs is carried out without
the use of adaptors.
Therefore, do not use any type of adaptor
To avoid malfunctions, be especially careful about the following
with this unit.
points.
®@ With CDs, CDV discs, and single-sided LDs, always be sure to
@
Do not place any object other than a disc on the disc table.
load discs with the iabel side facing upward.
@
Do not move the player while a disc is playing. This will cause
the disc to be scratched
®
Be careful not to catch your finger in the disc table section
while the disc table is being retracted into the unit.
Also, be
careful that children do not put their hands into the inside of the
unit while the disc table is open. This may cause injury.
29
<VRB1074>
Advertisement
