Advertisement
FUNCTIONS
MIC ECHO
To adjust the microphone echo level
MIC ECHO
To create a live atmosphere (Surround function)
HALL
SUR-
STAGE
=
ROUND
O (x
-OUND
or
ARENA
ae.
ey:
Echo is increased by turning the control to the right and
decreased by turning the control to the left.
Press the SURROUND button, then select HALL, STAGE or
ARENA to create the desired atmosphere.
HALL:
Creates an atmosphere of singing in a concert hall.
Echo and reverberation sounds are relatively long.
STAGE:
Creates an atmosphere of singing on an indoor
stage. Direct sounds are emphasized and reverberation
sounds are suppressed.
ARENA:
Creates an atmosphere of singing on an outdoor
stage. Reverberation sounds are small and echoes are long.
POPS
SAZZ
=) ©
BALLAD
ee
Press the VOCAL button, then select POP, JAZZ, or BALLAD
to create the desired vocal effect.
POPS:
This mode is best for crisp, energetic vocals. High
frequencies are emphasized and echoes are short.
JAZZ:
Set this mode for deliberate, unhurried vocals. Low
frequencies are emphasized and echoes are long.
BALLAD: This mode is best for soft, gentle vocals. Echoes
are subdued with short delay times.
To create a chorus effect (Chorus function)
CHORUS
Ty
22
<VRB1074>
Press the CHORUS button.
High vocal sounds of 1/8 pitch and 1/4 pitch are added to the
original vocals, creating the effect of two or three people
singing.
NOTE:
The chorus function, key control function and vocal effect
function cannot operate simultaneously.
Advertisement
