Download Print this page

Kenwood DPC-741 Instruction Manual page 23

Hide thumbs Also See for DPC-741:

Advertisement

• Place the unit in a stable position not subject to the vibrations
of the car,
• The plug may not match the cigar lighter socket of some car
models,
• If sound is not produced, change the tape playing direction of
the car stereo.
(Sound is not produced if the car stereo is set to play tape side
B.)
• The sound reproduction may not be possible with some car
stereo models.
1
, If the unit cannot be operated with the car battery adapter
connectect suspect the possibility of a blown fuse. The
fuse can be replaced by turning the electrode on the tip of
the adapter plug. When replacing the fuse, be sure to use
a fuse with a rating of 1 A,
2
. Do not leave the products or batteries in the car, particularly
above the dashboard, for this may lead to malfunction or
damage due to solar heat,
3, When the unit is not used, unplug the car battery adapter.
[Otherwise, the car battery may run out, with some car
models.)
4. If the unit is connected to a car stereo using an audio cord,
noise may sometimes interfere.
In case of abnormaltty such as smoke production, immediately unplug the car battery
adapter from the cigar lighter socket.

Advertisement

loading

This manual is also suitable for:

Dpc-641Dpc-542Dpc-541