Download Print this page

Kenwood DPC-741 Instruction Manual page 10

Hide thumbs Also See for DPC-741:

Advertisement

Card remote control unit for exclusive use with DPC-741/641
When the card remote control unit is used, connect the AC adapter or car battery
adapter to the main unit. The card remote control unit cannot be used if the main unit is
powered from batteries.
Main unit
Skip/search keys
REPEAT key
P.MODE key
DSP key
KENWOOD
©CD®©
© ® ©®
(a) (o)
H Numeric keys
Play/pause key
Stop/power OFF key
VOLUME keys
After setting the VOLUME
control of the main unit to the
maximum position, adjust the
listening volume with these
keys.
Operating range
Approx. 3 m
Remote control unit
The keys with the same names as the keys on the main unit function the same as the keys on the main unit.
• When pressing several operation keys on the remote control unit, leave an
interval of more than 1 second between keys.
• Erroneous operation may occur when the main unit is illuminated by direct
sunlight or the light of a high-frequency lighting (inverter) fluorescent lamp. In
such a case, change the unit position to prevent erroneous operation.
• For battery replacement, use a commerciaIly-avaliable lithium battery (CR20251.

Advertisement

loading

This manual is also suitable for:

Dpc-641Dpc-542Dpc-541