Advertisement
ENGLISH
8.
Power output
Total harmonic distortion
intermodulation distortion
(70Hz and 7kHz 4 : 1)
Power bandwidth
(IHF)
Frequency response
Input sensitivity/impedance
Damping factor
Channel
separation
Hum and noise
Signal to noise ratio
(at rated power)
Slew rate
Power consumption
Dimensions
(Wx Hx D)
Weight
DA-A10DC
100W continuous power per channel, both channels driven
into 8 ohms from 15Hz to 30kHz, with 0.01% THD
0.005% at S50W per channel, both channels driven into 8
ohms from 20Hz to 20kHz
0.008% at rated power, 8 ohms
0.01% at 1W per channel, 8 ohms
10Hz to 100kHz at 0.1% THD, 8 ohms
100 from 20Hz to 20kHz, 8 ohms
100dB at 1kHz
80dB at 20kHz
0.12mV (unweighted, closed circuit)
107dB (unweighted, closed circuit)
122dB (IHF, A network, closed circuit)
118dB (DIN, closed circuit)
30V /us at 50V peak to peak, 8 ohms
6OOW (IEC nominal)
390W at rated power, 8 ohms
240W (UL nominal)
425 x 170 x 285mm
(16-3/4 x 6-3/4 x 11-1/4")
16kg (35-1/4 Ib)
DA-A15DC
150W continuous power per channel, both channels driven
into 8 ohms from 15Hz to 30kHz, with 0.01% THD
0.005% at 75W per channel, both channels driven into 8
ohms from 20Hz to 20kHz
0.008% at rated power, 8 ohms
0.01% at 1W per channel, 8 ohms
10Hz to 100kHz at 0.1% THD, 8 ohms
100dB at 1kHz
80dB at 20kHz
119dB (DIN, closed circuit)
9OOW (IEC nominal)
550W at rated power, 8 ohms
320W (UL nominal)
425 x 170 x 285mm
(16-3/4 x 6-3/4 x 11-1/4")
17.7kg (39 Ib)
Supplied.with: pin plug cord
0877 BOOSHO4
Advertisement
