MASSEY FERGUSON Combines MF 7340 Workshop Service Manual page 40

2.12.3 Main transmission drive belt (3)
Spring compression: Load 80 N - Deflection 20
mm
The belt tension is adjusted using the lower part of
the tensioner (2) after loosening the screw (1).
2.12.4 Clean grain and returns augers drive belts (4)
Spring compression: At index: 130 ± 1
The belt is adjusted using the tensioner (2) after
loosening the screws (1); the length of the spring
must correspond to the length of the load index
(3).
2.12.5 Straw walker drive belt (5)
Spring compression: Load 110 N - Deflection 20
mm
The belt tension is adjusted using the lower part of
the tensioner (2) after loosening the screw (1).
Combines
LA327509010M_7340_EN
Fig. 10
Fig. 11
Fig. 12
2. General Information - 00
GUID-C53A5DB5-D841-4769-8575-CE7F3985EB4B [V1]
GUID-767C555E-6EA6-48E0-A3C1-EDCD7182F362-high.tif [High]
GUID-83A150FF-76B9-4E44-B958-07EEF4D4E26A [V1]
GUID-18394CB7-D9B8-430C-8B17-F23DEE976CE0-high.tif [High]
GUID-AA4C00D0-B317-4461-90F6-2909F6B24533 [V1]
GUID-7149102D-E57F-439E-A11B-375609CCA92C-high.tif [High]
2-31