2. General Information - 00
2.12.1 Table drive belt (1)
The belt is correctly tensioned when the spring
length (1) corresponds to the length of the gauge
(2); otherwise, restore the length using the nut (3).
2.12.2 Belt drive for main crop elevator shuttle (2)
The belt does not require any adjustment. When
the drive is disengaged, the belt must be clear of
the pulley (1).
If necessary, adjust the screw (2).
2-30
Fig. 8
Fig. 9
GUID-7F1E191E-7F01-4B86-8BF3-ABAABBBBB13E [V1]
GUID-3573218E-D3C9-437A-B7B4-89A2DC48760C-high.jpg [High]
GUID-7C6C41D4-FCD1-48E4-9D69-034E5168E137 [V1]
GUID-0814D57E-A8DE-4A3D-BEE9-D07861340065-high.tif [High]
Combines
LA327509010M_7340_EN