[8] Be sure to wear insulated gloves when handling is required during operation. After Use [9] The ROHM Evaluation Board contains the circuits which store the high voltage. Since it stores the charges even after the connected power circuits are cut, please discharge the electricity after using it, and please deal with it after confirming such electric discharge.
Page 3
BD9611MUV EVK BD9611MUV-EVK-001 (24V → 12V, 10A) Introduction This user’s guide will provide the steps necessary to operate the BD9611MUV-EVK-001 and evaluate ROHM’s BD9611MUV synchronous buck-boost DC/DC controller. Component selection, operating procedures and application data are included. Description Using a synchronous rectified step-down DC/DC converter IC BD9611MUV, BD9611MUV-EVK-001 evaluation board outputs 12 V with a 15V to 36V input voltage and provides 10A output current.
Page 15
Specific Applications). Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses, or losses incurred by you or third parties arising from the use of ROHM Products for Specific Applications.
Need help?
Do you have a question about the BD9611MUV EVK and is the answer not in the manual?
Questions and answers