Whirlpool WGD97HEDC0 Use & Care Manual page 9

Cycle Guide - Manual Cycles
Settings and options shown in bold are default settings for that cycle.
If settings are changed, the new settings will be remembered (except on Quick Dry). If there is a power failure, settings will return to
the default.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Adjusting drying time on Timed Cycles
When you select a Timed Cycle, the time
appears in the display. Use + and - to increase
or decrease the time in 1-minute increments.
Touch and hold to change the time in 5-minute
increments.
The maximum dry time is 100 minutes.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air only) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Drying Default Available
items t0d_: I Cycle: Temperature: Time: Options:
Small loads and Quick Dry High 26 Wrinkle Shield
TM
_
For small loads of 3-4 items.
sportswear Medium
Low
Extra Low
Air Only
Any load Timed Dry High 40 Wrinkle Shield
TM
_
Use to dry items to a damp level for items that do
NOTE: Select Air Medium _ not require an entire drying cycle. Select a drying
Only to dry foam, Low temperature based on the type of fabrics in your
rubber, plastic, Extra Low load. If you are unsure of the temperature to select
or heat-sensitive Air Only for a load, select the lower setting rather than the
fabrics, higher setting.
t On some models, you may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium
Drying Temperature settings.
Cycle Guide - Steam Cycle (steam models only)
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
I I' Defau..
refresh: . Cycle:. Temperature:. Time: Options: . Cycle Details:
Shirts, blouses, and Steam High 22 Wrinkle Shield
TM
_ Use to reduce odors and light wrinkles.
slacks Refresh Medium Static Reduce* _ Do not add dryer sheets.
You may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying
Temperature settings.
* On steam models only.
Load Size Recommendations
For best results, follow the load size recommendations noted
for each cycle.
Q mall load: Fill the dryer drum with 3-4 items, not more
than 1/4 full.
_ Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not pack tightly. Items need to tumble freely.