Saxby Lighting Eclipse CCT 108280 Instruction Manual

Wiring

Having correctly identified the wiring from your light fitting, Pull the wire through the hole and connect to the terminal box
back of the product in the following way:
SUPPLY
NEUTRAL
SWITCHED LIVE

Technical Data

Supply
220-240 V~, 50 Hz
Voltage:
Bulb
14.5W LED module (SMD), CCT 3000/4000/6500K
Type:
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
The power supply is Double Insulated and does not require connection to an Earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
This product is rated at IP44.
44
IP

Care and Safety

We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
Mirror-Use a damp cloth or a proper glass cleaner. Do not use abrasive materials as these will damage the finish.
Live Voltages may be present in this unit even when turned of or when completely disconnected. For your safety,
always switch off the power supply before changing lightbulbs, or cleaning.
The mirror must be replaced immediately should it become cracked or damaged. This fitting must
not be used without the mirror in place.
Replace Cracked Mirror
For further information, please visit https://www.lighting-info.co.uk/108280
V3 19/10/2023
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
LIGHT FITTING
Check that...
BLUE (N)
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of
BROWN (L)
the terminal box.
This product contains a light source of energy efficiency class E.
Instruction manual
Eclipse CCT
108280
www.saxbylighting.com