Sony SHAKE-99D Service Manual page 21

•
Parameter of error code
This is the detail of error code.
Example of Error code
1. 01 05 04 04
00 00 00 00
•
Time of error code
This is the laser time when an error occurred.
Example of Error code
1. 01 05 04 04
00 00 00 00
To clear the Laser Hours
Press the [ DISPLAY] button and then press the [CLEAR]
button. The data for both CD and DVD data are reset.
Emg. History Check
Laser Hours CD
DVD
1. 01 05 04 04
00 00 00 00
2. 02 02 01 01
00 00 00 00
Next Next Page Prev Prev Page
O Return to Top Menu
To clear the Emergency History
Press the [DVD TOP MENU] button and then press the [CLEAR]
button.
The error code for all emergency history would be reset.
Emg. History Check
Laser Hours CD
DVD
1. 00 00 00 00
00 00 00 00
2. 00 00 00 00
00 00 00 00
Next Next Page Prev Prev Page
O Return to Top Menu
To clear the Initialize Setup Data
Press the [DVD/TUNER MENU] button and then press the
[CLEAR] button on the remote commander.
Emg. History Check
Laser Hours CD
DVD
Initialize setup data...
Next Next Page Prev Prev Page
O Return to Top Menu
00 92 46 00
00 00 23 45
00 92 46 00
00 00 23 45
0h 0min
0h 0min
00 92 46 00
00 00 23 45
00 A9 4B 00
00 00 23 45
999h 59min
999h 59min
00 00 00 00
00 00 00 00
00 00 00 00
00 00 00 00
999h 59min
999h 59min
HCD-SHAKE99/HCDSHAKE100
To return to the Top Menu of Remocon Diagnosis Menu
Press the [0] button on the remote commander.
•
Check Version Information
To check the version information, please follow the following
procedure.
1. From the Top Menu of Remocon Diagnosis Menu, select "4.
Version information" by pressing the [4] button on the remote
commander. The following screen appears on the on-screen
display.
Version information
Firm (Main) : Ver. xxxxx
Firm (Sub) : xxxxx
RISC : xxxxx
8032 : xxxxx
Audio DSP : xxxxx
Servo DSP : xxxxx
O Return to Top Menu
To return to the Top Menu of Remocon Diagnosis Menu, press
the [0] button on the remote commander.
Ver. 1.1
19