Table of Contents
Advertisement
SS-SHAKE99/SHAKE100
REVISION HISTORY
Ver.
Date
1.0
2014.01
New
1.1
2014.05
Addition of Argentina model (SS-SHAKE99).
Addition of SS-SHAKE100 model.
Add Cushion C in page 5.
1.2
2014.07
Add Ref. No. 23 in page 5.
Change P/N of Ref. No. 10, 12, 13, 14, 15, 18 and 20 in page 5.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
Description of Revision
, follow the procedure below.
Advertisement
Table of Contents
