Advertisement
NOTE
•
Wiring instructions: The power should be connected to binding post inside the junction box, which IP
grade should be higher than the lmap's IP grade. And the junction box should have fasten device for
the wires. Inside terminal block shall conform to EN 60998-2-1 or EN 60998-2-2 (specification: three
terminals, atleast 250V and 1.5mm2).
•
User should prepare all the necessary accessories and spare parts (Spare parts not provided) including
junction box.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
Advertisement
