Warranty; Contact Details; Additional Information - TeleAdapt ChargePort M TA-8350 Installation Manual

6
Lanyard
The lanyard is secured by attaching it to the security bracket using the
screw provided.
Finishing Installation
Plug the supplied adapter into a suitable mains outlet. The indicator on the
front should show solid blue.

Additional Information

ChargePort M has three wireless charging pads, The main iPhone
charging pad can charge up to 15W, the other two charge up to 5W each.
Place device to be charged on one of the Qi charging pads and adjust
position until the charging indicator pulses blue.
If the indicator does not pulse blue then adjust the position of the device
being charged until it does.
You can charge iPhone, Apple Watch and AirPods simultaneously.
Do NOT place metallic objects on the wireless charging pads.
In case of accidental placement of metal objects on one of the wireless
charging pads, ChargePort Duo is equipped with Foreign Object detection
(FOD). If metallic foreign objects are detected by ChargePort Duo then
charging will be disabled and the indicator will flash blue. Remove the
foreign object.
ChargePort Duo also monitors temperature to check for signs of over
heating. If the temperature is too high then charging will be disabled and
the indicator will flash blue until the temperature returns to the normal
range.
Indicator States
On: Powered on, standby.
Breathing: Charging.
Flashing: Foreign object detected, over temperature, wrong charger.

Warranty

Please see TeleAdapt "Sales Terms & Conditions" which are available at
http://www.teleadapt.com/teleadapt/sales-terms-conditions.html.

Contact Details

Americas
TeleAdapt Inc
1315 Greg Street
Suite 110
Sparks
NV 89431
USA
Tel: +1 775 355 8585
Asia
TeleAdapt (Hong Kong) Limited
Hong Kong
Kowloon
Tel: +852 2155 1383
Email: hk@teleadapt.com
FCC Warning
This device complies with Part 18 and Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
(a)Max. Electric Field Emissions: 6.12V/m
Max. Magnetic Field Emissions: 0.54V/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices operating at the same frequency
as possible.
RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and
any part of your body.
7