Table of Contents
Advertisement
7.1
UNIT DISASSEMBLY
1.
2.
Anak
WwW
NSN
. Removing screw @ releases the under base.
. Removing screw QO releases the motor assembly.
. Removing screw @ releases the control board unit.
. Removing
screw
@ releases the switch base board unit,
and removing screw @releases the PU base board unit.
. Removing
screw @releases the power transformer as-
sembly.
Mechanism base
board assembly
10)
Guide bar
7.2
CARRIAGE REMOVAL
1. Remove the fixer from the carriage and the wire from
the pulley. (See Figure 7-2)
2. Remove
screw @and
pull the guide bar away from the
carriage
in the direction
indicated
by the arrow. The
carriage and tonearm assembly can now be removed.
3. Removing the spring will release the carriage board as-
sembly, and removing screw
@) will release the mech-
anism base board assembly.
Carriage
<9)
>
fj
ky 6A
Fig. 7-2 Removing Carriage Wire
Carriage board
assembly
Fig. 7-3 Carriage Removal
33
Advertisement
Table of Contents
