Table of Contents
Advertisement
PL-L7O
5.2.8
<4,
PrPSW
This switch has two separate functions
1. Function 1... Locate.
During automatic
playing (when the tonearm is on the
rest and the player is started using the S/S SW) and during
manual
playing (when the tonearm
is on the rest and the
player is started using the <4 SW), this switch performs a
locate function.
44SW ON .. . The tonearm will move toward the center of
the record.
>> SW ON...
The tonearm will move toward the outside
edge of the record.
o
>]
>[s]
>[7
Example: G]—[2]
>{8
Now playing
With +SKIP button pressed
2. Function 2... Skip
During programmed
playing {when the player is started
using the program
SW), this switch performs a skip func-
tion.
<SW
(+SKIP)
. .. Player stops playing present selection
and goes on to the next.
It will skip one selection
for
each time it is pushed.
be SW (—SKIP) . . . When pressed once it will return to the
beginning of the present selection. If pressed N times, then
it will go back N — 1 selections.
When programmed to play selections
1, 2, 4, 5, 7, 8
With —SKIP button pressed
Record surface
Three
times
Twice
Once
Once
Three
times
Twice
Selection 8 | Selection 7|Selection 6|Selection 5
Selection 4/Selection 3} Selection 2| Selection 1
Fig. 5-18
5.3 MODE TRANSITION
5.3.1
Initial Reset
Power ON
STOP
STATUS
Qt: PD6O32
+B: 12V generated
+B, : SV generated
Fig. 5-19
16
Phono
motor is
stationary
LED 'UP'
goes on
The tonearm
returns
to
the rest
Initial reset
complete
Advertisement
Table of Contents
