Table of Contents
Advertisement
NLPreventing material damage
2 Preventing
material damage
PAY ATTENTION!
Using the plinth, drawers or
appliance doors as a seat or step can
damage the appliance.
▶
Do not stand or lean on the plinth,
drawers or doors.
Contamination with oil or grease can
make plastic parts and door seals
porous.
Keep plastic parts and door
▶
seals free of oil and grease.
Parts of the device made of metal or
with a metallic appearance may
contain aluminum. Aluminum reacts
on contact with acidic foods.
Do not store unpackaged food in
▶
the appliance.
3 Environmental protection and
savings
3.1 Disposal of the packaging
The packaging materials are
environmentally friendly and can be
reused.
▶ Dispose of the individual components
separately according to type.
3.2 Saving energy
If you follow these directions, your
device will use less power.
Choice of installation location
†Do not expose the device to di-
direct sunlight.
86
†Place the appliance as far as possible
body from radiators, stove and
other heat sources:
– Keep a distance of 30 mm
from electric or gas stoves.
– Keep a distance of 300 mm from
oil and coal stoves.
†Never open the external ventilation opening
cover or close.
Save energy when using.
Remark:The arrangement of the
equipment parts has no influence on
the energy consumption of the
appliance.
†Open the device only briefly. †Never
enter the ventilation openings
nenin, or cover or close the
ventilation grilles on the outside.
†Transport refrigerated foodstuffs
parts in a cool bag and put them in the
appliance quickly.
†Warm food and drinks first
to cool, then place in the
appliance.
†To avoid the cold of the deep-
to use frozen products, put them in the
refrigerator compartment for thawing. †
Always leave some space between the legs
equipment and the back wall. †
Pack the food in air
closed.
†Defrost the freezer regularly. †Open the
freezer compartment only briefly and
close it carefully.
Advertisement
Table of Contents
