Restart Your Computer - Visioneer PaperPort Strobe 500 Getting Started Manual

I A P P
F LL ARALLEL ORTS
If your computer's parallel ports are all in use by other devices, such as
printers, you can "daisy-chain" the scanner and up to four other devices so
they share the port. To achieve the best scanner performance when daisy-
chaining devices in this manner, connect the PaperPort Strobe cable
directly to the computer, and then attach the other devices to the housing
of the cable as shown in the figure below.
To add the scanner to a parallel port already in use:
1. Turn off the power to your computer.
2. Unplug the cable currently plugged into your computer's parallel port.
3. Plug the PaperPort Strobe cable into the parallel port.
4. Plug the other cable (the one you unplugged in step 2) into the parallel
port on the housing of the PaperPort Strobe cable.
Before: The printer is connected
directly to the parallel port.

5. Restart your computer.

NOTE: If you don't want to daisy-chain the parallel devices, you can
install another parallel port card into the computer. For details, please
see the Readme that you received with your scanner.
C S
ONNECTING THE CANNER TO
A U
RE IN SE
After: The printer is connected to
the PaperPort Strobe cable, which is
connected to the parallel port.
Y C 7
OUR OMPUTER