D Anleitung
Die gedruckte Anleitung, die dem TX8 Smart 2.0 bei
liegt, verweist auf die Verwendung der Trixie App, welche
voraussichtlich ab Januar 2024 erhältlich sein wird.
Genau wie der TX8 Smart 1.0 kann auch der 2.0 mit der
Tuya Smart App genutzt werden, lediglich das Kopp-
lungsverfahren unterscheidet sich.
Vorbereitung
Die Tuya Smart App kannst du für Android-Geräte im
Google Play Store
und für iOS-Geräte im
herunterladen. Nachdem du dich mit deiner E-Mail-
Adresse registriert hast, kannst du den Kopplungspro-
zess starten.
Vergewissere dich, dass dein Smartphone über WLAN
mit dem Internet verbunden ist.
Hinweis: Beachte auch die Hinweise in der dem Gerät
beiliegenden Anleitung, insbesondere den Abschnitt
„Kopplung des Gerätes".
Kopplung des Gerätes
1. Klicke unter „Mein Zuhause" auf „Gerät hinzufügen".
2. Wähle im Bereich „Kamera & Sperre" die „Sicherheits-
kamera (2,4GHz&5GHz)" aus.
3. Schalte den Futterautomaten ein. Halte die -Taste
gedrückt (ca. 7 Sekunden), bis du ein akustisches Signal
hörst. Dies setzt den Automaten auf die Werkseinstel-
lungen zurück und bereitet ihn für die Kopplung vor.
4. Klicke auf „Weiter", sobald die blaue LED „LINK" blinkt
(nach ca. 20 Sek.).
5. Gib das WLAN-Passwort ein und klicke auf „Weiter".
Hinweis: Falls dein WLAN-Passwort Sonderzeichen
enthält, kann es zu Problemen beim Kopplungsprozess
kommen. Ändere in diesem Fall dein WLAN-Passwort,
sodass es ausschließlich Buchstaben und Ziffern enthält.
Die maximale Länge des WLAN-Passwortes beträgt
20 Zeichen.
6. Halte den QR-Code im Abstand von 15–20 cm vor die
Kamera des Futterautomaten. Wurde der QR-Code
erkannt, ertönt ein Signalton. Bestätige mit „Signalton
gehört".
7. Warte, bis die Verbindung erfolgreich hergestellt wurde.
Sollte die Verbindung nicht hergestellt werden können,
kontaktiere den Support unter smartsupport@trixie.de.
Kopplung des Futterautomaten TX8 Smart 2.0 mit der Tuya Smart App/
Pairing the Automatic Food Dispenser TX8 Smart 2.0 with the Tuya Smart App
Apple Store
TRIXIE Heimtierbedarf · Industriestr. 32 · 24963 Tarp · GERMANY · www.trixie.de
TRIXIE UK Pet Products Ltd.,Unit 7, Deer Park Road, Moulton Park, Northampton NN3 6RZ
E Instructions
The printed instructions included with the TX8 Smart
2.0 refer to the use of the Trixie APP, which is expected
to be available from January 2024. Just like the TX8
Smart 1.0, the 2.0 can also be used with the Tuya Smart
app, only the pairing procedure is different.
Preparation
You can download the Tuya Smart app for Android
devices from the
Google Play Store
from the
Apple
Store. Once you have registered with
your e-mail address, you can start the pairing process.
Make sure that your smartphone is connected to the
internet via Wi-Fi.
Note: Also observe the instructions in the manual
supplied with the device, in particular the section
"Pairing the device".
Pairing the device
1. Click on "Add Device" under „Home".
2. Select the „Smart Camera (2.4GHz&5GHz)" in the
„Camera & Lock" area.
3. Switch on the automatic feed dispenser. Press and
hold the button (approx. 7 seconds) until you hear
an acoustic signal. This resets the feeder to the factory
settings and prepares it for pairing.
4. Click on „Next" as soon as the blue „LINK" LED flashes
(after approx. 20 sec.).
5. Enter the Wi-Fi Password and click on "Next".
Note: If your Wi-Fi password contains special characters,
there may be problems with the pairing process. In this
case, change your Wi-Fi password so that it only contains
letters and numbers. The maximum length of the Wi-Fi
password is 20 characters.
6. Hold the QR code at a distance of 15–20 cm in front of
the dispenser's camera. If the QR code is recognized, a
signal tone sounds. Confirm with „I Heard a Prompt".
7. Wait until the connection has been successfully
established.
If the connection cannot be established, please contact
support at smartsupport@trixie.de.
#24344
and for iOS devices
Need help?
Do you have a question about the 24344 and is the answer not in the manual?
Questions and answers