Introduction To The Menu - PROFECO 42250 Instruction Manual

• Image output
Images captured can be reviewed and output by connecting to a computer
via Micro-USB.
• Read images
Open the USB cover as shown in the figure ②. Use the USB cable to
connect the USB port, and then connect the computer to read the images
or save them to the computer.
The supported operating system by verification includes: winxp, win7, win
8, win10, Apple system. It is recommended to use the attached USB cable
or USB cable with higher quality.
Note: When connecting to a computer, disconnect the data cable after
selecting "eject device safely" to avoid file system damage and other
problems. If "unable to save" and other problems occur, you can locate the
HDD in the computer and repair it.

Introduction to the menu

Press the left of the "MENU/ " button and the menu bar appears. The submenus are
"Image Overlap", "Image", "Video", "Colour Palette", "Emissivity" and "Adjustment".
1. "Image Overlapping" Submenu
1.1 Description of image overlap
Image overlapping makes it easier for users to understand the infrared images
by using aligned visible and infrared images. By using image overlapping, the
visible image of each infrared image can be captured to accurately represent
the temperature distribution in the target area. and more effectively shared
with others.
1.2 Using image overlapping
Press the "MENU/ " button to display the main menu and select "
registration) on the main menu. Press the "SELECT/ENTER" button to enter
the Image registration mode and use the navigation buttons (up, down, left,
and right) to move the visible image. Press the "SELECT/ENTER" button to
exit the Image Blend mode (Note: If no operation is performed for more than 6
seconds, the Image Blend mode will be automatically exited).
" (Image
11