Table of Contents
Advertisement
3. Key description
Initial operation
• Product boot/shutdown
Press and hold the "MENU/ " button for more than 3 seconds to turn the
thermal image on or off.
• LCD screen display
When the unit is switched on, the screen displays the thermal imaging
status.
Note: Time adjustment may be required when moving the camera between
environments with widely varying ambient temperatures.
• LED illumination on/off
Press and hold the image capture button for about 3 seconds to turn the
LED indicator on and off.
• Switching between infrared thermal image and visible image
Press the "⯇" or "⯈" key to toggle the degree of fusion between the
derived thermal images and the visible images (the degree of fusion is 0%,
25%, 50%, 75% and 100%).
• Image capture
Press the Capture button. If the image is captured successfully, the screen
will display "Save photo? If "Yes" is selected, press the "MENU/ " button
to save the image. If "no" is selected, press the "SELECT/ENTER" button
to determine not to save the image. to save the image.
• Video recording
In the normal startup and operation interface, press and hold the Capture
button, the screen will display the prompt "Record Video?", if you want to
select "Yes" at this time, please press the "MENU/ " button or the Capture
button to start recording. If you want to select "No", press the
SELECT/ENTER button to cancel the recording. When recording is
complete, press and hold the capture button again to stop recording.
• Hide high/low temperature column function at the bottom of the
screen
After normal start-up, press the "⯅" button and the high/low temperature
column will appear at the bottom of the screen. It can also be hidden by
pressing "⯆".
10
Advertisement
Table of Contents
