Table of Contents
Advertisement
MARRIAGE
CAUTION
•
Before proceeding with [Marriage], ensure that all cabinet back covers are closed.
•
The [Marriage] procedure can only be completed by those who have been officially authorized for [Marriage].
•
When proceeding with [Marriage], make sure to follow the procedure specified in the manual.
•
Pressing the physical [Marriage] button on the master cabinet can only be actioned by a person authorized for
[Marriage].
•
All procedures of the [Marriage] process (including HW/SW [Marriage]) must be managed/supervised by a person
with the authority for [Marriage].
•
Person(s) with official authority for the installation, management, and maintenance of the LED screen and [IMB]
must observe the following.
- While [Marriage] is in progress, a person with authority for [Marriage] must be present next to the LED screen and
[IMB].
- When [Marriage] is in progress, and for all operations, commands, and inputs and outputs related to those
commands during the [Marriage] process, use a PC directly connected to the LED screen and [IMB]. The PC must
be one that is trusted by the person with the authority of [Marriage] and must have no network environment
configured. The use of LAN or WAN in the process of [Marriage] is strictly prohibited.
- Make sure to check that there is no abnormality in the physical connection status (cable connection, communication
status, etc.) of the LED screen and [IMB]. This is to prevent tampering during the [Marriage] procedure.
- Before starting the [Marriage] procedure, make sure to check that all the back covers of the cabinets constituting
the LED screen are firmly closed, and that there is no abnormality in the external condition. Also ensure that
all tamper-resistant labels used in the LED screen are undamaged. In addition, make sure there are no signs of
tampering in any form before starting the [Marriage] procedure.
- Periodically check the LED screen and [IMB] for signs of tampering, and record the results of the checks. If any
traces or signs of malicious access to the LED screen and [IMB] are found, the LED screen and [IMB] will stop
working immediately. In the event of such a case, please contact the LGE service representatives immediately so
that they can take steps to comply with DCI regulations.
55
Advertisement
Table of Contents
