Commissioning The Sun2000 (Using The App); Upgrading The Sun2000 Using A Usb Flash Drive - Huawei SUN2000-250KTL Series User Manual

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series
User Manual
Figure 7-14 Setting running parameters
For details about the parameter settings, see the

7.4 Commissioning the SUN2000 (Using the App)

You can reset the password and view alarms on the app. For details about how to
reset the password on the app, see the
●
●

7.5 Upgrading the SUN2000 Using a USB Flash Drive

USB flash drives of SanDisk, Netac, and Kingston are recommended. Other brands
may be incompatible.
Procedure
Step 1 Download the required software upgrade package from the technical support
website.
Step 2 Decompress the upgrade package and copy all files to the root directory of the
USB flash drive.
Do not modify the content in the upgrade package because the files involve RSA
signature verification. If you modify the content, the upgrade will fail.
Step 3 Connect the USB flash drive to the USB port. The system automatically identifies
the USB flash drive and executes all commands specified in the boot script file.
View the LED indicator to determine the operating status.
Issue 07 (2023-06-30)
For details about how to reset a password, see
To view alarms, log in to the FusionSolar app, choose Alarm > Active alarm,
and rectify the fault based on the alarm handling suggestions.
NO TE
Delete the script file immediately after use to reduce information disclosure risks.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
7 Power-On and Commissioning
SmartLogger3000 User
FusionSolar App User
D Resetting
Manual.
Manual.
Password.
71