Intel NUC DC3217BY User Manual page 6

Intel NUC Kit DC3217BY User Guide
5. Secure the wireless card to the standoff with the small silver screw (C).
6. Remove the black tape holding the two wireless antennas.
7. Slide the clear plastic protective sleeve down onto the antenna wires, away from the connectors at
the ends of the antennas (D).
CAUTION
Do not attempt to pull the plastic protectors off the ends of the antennas. Doing so is
likely to damage the metal leads of the antennas.
8. Attach the antenna leads to the connectors on the wireless card (E).
6