Table of Contents
Advertisement
To clean the ADF:
1. Wet a cotton swab with some isopropyl alcohol (95%).
2. Open the ADF cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean its
entire surface.
4. Wipe the pad from top to bottom. Be careful not to snag the swab
on the springs on either side of the pad.
5. Close the cover when you're finished.
R
ADF P
EPLACING THE
The ADF pad spring may begin to wear out after 150,000 scanned
pages. Problems with documents feeding into the ADF is an indication
that the pad spring may be wearing out.
You received a replacement pad in the original scanner box, and you can
also order a new one. See the "Visioneer 9650 Scanner Parts List" on
page 53 for ordering information.
A
AD
SSEMBLY
C
M
ARE AND
AINTENANCE
45
Advertisement
Table of Contents
