Table of Contents
Advertisement
26
V
9650 S
ISIONEER
Preview Auto-Area
Paper Size
Units
Ruler Units
Output Dimensions
I
G
CANNER
NSTALLATION
UIDE
B
C
RIGHTNESS AND
ONTRAST
Sometimes an item is scanned with the brightness and contrast set to be
too light or too dark. For example, a note written with a light pencil
may need to be scanned darker to improve legibility.
Brightness refers to the lightness or darkness of the image. Contrast is
the range between the darkest and lightest portions of the image. The
greater the contrast, the more the difference between the lighter and
darker shades in the image.
Dark/Light slider—adjusts the brightness of the scan. Drag the
I
slider to the right or left to increase or decrease the brightness.
Low/High slider—adjusts the contrast. Drag the slider to the
I
right or left to increase or decrease the contrast.
A
O
DJUSTING THE
UTPUT
The output size is the width and height of the image after it is scanned.
For example, if you plan to print the image on a piece of paper you can
select the output size to be 8.5 by 11.0 inches.
S
IZE
Advertisement
Table of Contents
