Table of Contents
Advertisement
S
CANNING FROM
8. Click the Scan button at the bottom of the Scan pane.
The Scan Manager opens. Use the Scan Manager to select scanning
options and to start the scanner.
9. From the Scan Method drop-down list, choose whether you are
going to scan a single item (Flatbed) or a stack of items (ADF).
Choose Flatbed to scan
a single item
Choose ADF to scan a
stack of documents
Click Preview to check
the image
Click Scan when you're
ready to scan
10. If you want to see what the scanned image will look like before
scanning its final image, click the Preview button.
The scanner scans a preview of the item and displays it in the Scan
Manager. You can now use the options on the Scan Manager to
fine-tune the image. For example, to adjust the brightness, drag the
Dark/Light slider. For details on adjusting images, see "Adjusting
the Image with the Scan Manager" on page 24.
Note: If you preview when scanning a stack of documents, the first
page of the stack feeds through the ADF for the preview. After
adjusting the scanner settings, replace that page on the stack so it is
scanned with the rest of the pages.
11. To preview the item with the new settings, click the Preview
button again on the Scan Manager.
W
98SE, ME, 2000,
INDOWS
XP
21
OR
Advertisement
Table of Contents
