Sony WEGA KV-30XBR910 Operating Instructions Manual page 92

[] Togo directlyto
programmingTimer1or 2,
press0 insteadof moving
the joystick*,
Clock/Ti m ers
Select to set the clock and to program your TV to turn on
and off at two scheduled viewing times.
TimerI
You can use the Timers to program
Timer2 the TV to turn on and off and tune
to a specific chaPmel at two
scheduled viewing times.
Timer I and Timer 2 are not available to be set until you set
the Current Time.
1 Move the joystick It or • to highlight Timer 1 or
Timer2. To set the timer, move the joystick *.
2 Move the joystick It or • to highlight one of the
following options, then press O.
Program Select to set the Timer by day,
time, duration, and channel.
4
Off Select to turn off the Timer. (Your
previous settings are saved.)
If you selected Program in step 2, move the joystick It
and _, to set the day(s), hour, minute, duration, and
channel numben Press @ or move the joystick * to
confirm each setting and move to the next setting.
Move the joystick _- to go back to the previous
setting.
Press MENUto exit the Menu. An LED on the front
panel will light, indicating the timer has been set.
CurrentTime
1 Press @ to select Current Time.
2 Move the joystick It and _, to set the current time
(day, hour, and minute). Press @ (or move the
joystick *) to confirm each setting and move to the
next setting. Move the joystick _- to go back to the
previous setting.
Press MENUto exit the Menu.
Demo Runs a demonstration of on-screen Menus.
91