Kenwood KX-W1060 Instruction Manual page 12

Tape dubbing operation
The dubbing refers to the copy of the recorded contents of
a tape to another tape (tape in Deck A — tape in Deck B).
1 insert tapes in the cassette decks.
Tape to be played Tape to be recorded onto
2 Select the type of tape in deck B.
be Normal tape -NORMAL
a
Chrome tape-+HIGH
| '3 Start dubbing.
@ Press the DUBBING switch.
= ON © OFF
DUSBING
DUBBING
Lights up
@) Press the REC and PLAY keys of deck B simulta-
neously. REC PLAY
Lights
14 up
@) Press the PLAY key of deck A.
PLAY
e Dubbing will start.
e@ The dubbing stops automatically when one side has been
dubbed. :
e After dubbing, be sure to press".he DUBBING switch to
OFF.
12 Kx-W1060/KX-W594 (En)
TAPE SELECTOR switch
PAUSE key
STOP/EJECT key
PLAY key
REC key
STOP/EJECT key
DUBBING switch
To stop dubbing
Press the STOP/EJECT keys of both decks A and B.
STOP/EJECT
To pause dubbing
Press the PAUSE key of deck B.
PAUSE
@ Ttoresume dubbing, press the PAUSE key again.
Notes:
1. The recording level cannot be adjusted for dubbing.
2. The DOLBY NR switch does not function during dubbing.
* The tape recorded by dubbing features the same NR system as
the original tape in Deck A.