Kenwood BLP41.A0CT Instructions Manual page 10

the mixer
the mixing tools and some
of their uses
K-beater
• For making cakes, biscuits, pastry, icing,
fillings, éclairs and mashed potato.
whisk
• For eggs, cream, batters, fatless
sponges, meringues, cheesecakes,
mousses, soufflés. Do not use the whisk
for heavy mixtures (e.g. creaming fat
and sugar) – you could damage it.
dough hook
• For yeast mixtures.
folding tool
• The folding tool is designed for folding
light ingredients into heavier mixtures
for example meringues, mousses, fruit
fools, Genoese sponges, soufflés and to
fold flour into cakes mixes. It is not to be
used with heavy recipes such as dough,
creaming fat and sugar or all in one
cake mixes.
creaming beater
• The creaming beater is designed for
creaming and mixing soft ingredients.
Do not use with heavy recipes such as
dough or hard ingredients, for example
those containing fruit stones, bones or
shells.
fitting the wiper blade
• The wiper blade is supplied already
fitted and should always be removed for
cleaning .
1 Carefully fit the flexible wiper blade
onto the tool by locating the base of
the wiper blade into the slot  then fit
one side into the groove before gently
hooking the end in place . Repeat
with the other side .
to use your mixer
1 Lift the head release lever  at the back
of the kitchen machine 1 and at the
same time lift the head a until it locks in
the raised position 2.
2 Place the required tool into the socket.
Then push up 3 and turn 4 the tool to
lock into position.
3 Fit the bowl onto the base. Place the
handle directly over the unlock symbol
, then gently turn the bowl clockwise
until the handle is directly above the
lock symbol
force and DO NOT overtighten 5.
4 Lift the head release lever  at the back
of the Kitchen Machine and at the same
time lower the mixer head a.
5 Plug into the power supply and
the 'mixer ready indicator light' will
illuminate.
6 Switch on by turning the speed control
to the desired setting.
7 Release the tool by turning clockwise
to unlock from the tool socket and then
remove.
important
• If the mixer head is raised during
operation, the machine will stop working
straight away. To re-start the mixer,
lower the mixer head, turn the speed
switch to the 'O' position, wait a few
seconds and then re-select the speed.
The mixer should resume operating
straight away.
• Whenever the mixer head is raised the
'mixer ready indicator light' will go out.
When the head is lowered, the light will
illuminate indicating the mixer is ready to
use.
5
. DO NOT USE excessive