Specifications; Mixer Section; Power Amplifier Section - Roland CPM-300 Owner's Manual

Specifications
1. Mixer Section
@Frequency Responce:
20 Hz-—20 kHz -2/+1 dB (Sens : min}
@Total Harmonic Distortion:
0.1% or less (sens ; min, 20 H7—20 kHz, rated output)
@®Noise Level:
{Input 150 W terminated, IHF-A Weighted typ.)
@ Equivalent input Noise Level:
-120 dBm
@ Residual Noise:
-89 dBm (all fader : min)
-72 dBm (master fader : max)
{all channel fader : min)
-72 dBm (master fader : max)
{all channel fader : nominal)
(all sens : min)
-72 dBm (master fader : max)
(all channel fader : nominal)
(all sens : max)
@Crosstalk:
~70 dB or less (1 kHz between channels)
-60 dB or less (1 kHz between L and R)
@£qualizer:
HIGH EQ: +15 dB (10 kHz shelving type)
LOW EQ: +15 dB (100 Hz shelving type)
@Digital Reverb:
Sampling Frequency: 48 kHz
Signal Processing: 24 bits
2. Power Amplifier Section
@Rated Output:
100 W x 2 (Stereo, both channels 8 W loaded, 20 Hz—20 kHz,
0.1 % or less THD)
150 W x 2 (Stereo, both channels 4 W loaded, 20 Hz—20 kHz,
0.1 % or less THD)
@Recommended Load Impedance:
4 Q or greater (STEREO)
@Frequency Response:
20 Hz—20 kHz (+1 dB 1W/8W)
@Total Harmonic Distortion:
0.05 % or less (Stereo, both channels 8 W loaded, 1 kHz, 50
Ww)
@S/N Ratio:
100 dB or greater (amp in 150 W terminated, IHF-A
Weighted)
20
3. Others
@Power:
AC 117/230/240 V (50/60 Hz)
@Power Consumption:
150 W {AC 117/230/240 V)
@Dimensions:
375 (W) x 307 (D) x 131 (H) mm
14-13/16 (W) x 12-1/8 (D) x 5-3/16 (H) inches
@Weight:
6.0 kg / 13 lb 40z
@Accessories:
Owner's Manual
* 0 dBm = 0.775 Vrms
* In the interest of product improvement, the specifications and/or
appearance of this unit are subject to change without prior notice.