Akai UC-K2 Service Manual page 55

•
•
AC INLET SYSTEM
This model is equipped with an AC INLET SYSTEM. Please refer to the AC INLET SYSTEM CHART below for the
specific type. By the AC INLET SYSTEM, AC (mains) cord can be connected to and disconnected from the model
because the model is provided with socket exclusively for AC (mains) cord on its main body.
Please note, however, that certain models are not equipped with this system and has a built-in AC (mains) cord as
before.
AC INLET SYSTEM CHART
Connects to
machine's
AC Inlet
CLASS I
Most of
European
countries
Denmark
Australia
differs according
to wall socket
Parts List for AC (mains) Cord Set
Standard
CEE Cord
BEAB Cord
Class I
SAA Cord
U/T Cord
CEE Cord
Class II
BEAB Cord
SAA Cord
U/T
Cord
Picture 1
AC INLET
to be
installed
on machines
Picture 2
AC (mains)
cord
Description
Set CEE
(3 cores)
Set BEAB (3 cores)
Set SAA (3 cores)
Set U/T (3 cores)
Set CEE
(2 cores)
Set BEAB (2 cores)
Set SAA (2 cores)
Set U/T (2 cores)
CLASS II
[g]
This mark indicating double insula-
tion will be attached to machine's rear
panel
Connects to
machine's
AC Inlet
Type of AC Inlet
3P
3P
3P
3P
2P
2P
2P
2P
Most of the
European
countries
Australia
differs according
to wall socket
Parts No.
EW302993
EW302994
EW302996
EW302646
EW638144
EW302995
EW302991
EW302899
49