Advertisement
7 When baking has been completed, remove the bread pan
from the bread maker.
After the buzzing stops, push the OFF button, open the lid, and pull the
pan out by the handle.
Removing the bread
Turn the bread pan upside down and shake
until the bread comes loose.
If you have baked a small loaf, it may stick
to the mixing blade and prove impossible to
shake out. In this case, wait until the bread
pan is cooled off sufficiently to allow it to be
handled.
You
can
then
insert your finger
between the loaf and the bread pan, and lift
it out.
0 After use
Always unplug the bread maker after each use.
@lf you do not push the OFF
button after the buzzing. stops,
the ventilator will run 30 min- —
utes to keep the bread from
"getting soggy from the cooled
steam,
@ Do not put the hot bread pan
on the lid of the bread maker
or any other item that may be
damaged
or discolored
from
~the heat!
@ if the mixing blade comes out
attached to the bread, remove
it with tongs or a towel.
WARNING:
It is hot!
@if. the mixing. blade remains
inside the bread pan, see page
19.
:
é
Sees
"Maintenance"
for
further
information.
:
:
- @For
safety»reasons, be sure
to unplug: the bread
maker
after each-use:
If you-only push the OFF but-
ton, the BREAD indicator light
stays on and the START but-
'ton could be pustied by ac-
cident." ~
Advertisement
