Subscribe to Our Youtube Channel
Related Manuals for Mirion Technologies BIODEX SOUND PRO 058-710
Summary of Contents for Mirion Technologies BIODEX SOUND PRO 058-710
- Page 1 SOUND PRO COMBINATION TABLE ™ OPERATION MANUAL 058-710 058-715 7 Vreeland Road, Florham Park, NJ 07932 (800) 631-3826 | (201) 825-9500 | www.biodex.com FN: 08-233 Rev E 4/23...
- Page 2 This manual covers operation procedures for the following products: 058-710 Sound Pro Combination Table, 115 VAC 058-715 Sound Pro Combination Table, 230 VAC Contact Information Manufactured by: Mirion Technologies (Capintec), Inc. 7 Vreeland Road, Florham Park, NJ 07932 (800) 631-3826 | (201) 825-9500 | Fax: 201-825-1336 email: www.biodex.com...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Definition of Symbols ..........................4 Before Proceeding ..........................5 Important Safety Information ......................7 Chapter 1: Introduction ........................8 Table Parts and Adjustments ......................9 Chapter 2: Assembly and Table Operation ..................10 Relocating the Table ........................10 Height Adjustment ......................... 10 Trendelenburg Positioning ...................... -
Page 4: Definition Of Symbols
Symbol Definition Carefully read these instructions prior to use Operating Instructions Caution General Warning General Mandatory Action Dangerous Voltage “On” Power “Off” Power Pinch Point Earth (ground) Alternating Current Fuse USB Connector/Cable Non-Ionizing Electromagnetic Radiation Waste in Electrical Equipment Disposal Classification and Identification of Equipment Date of Manufacture Manufactured By Type B Applied Part... -
Page 5: Before Proceeding
Before Proceeding NOTE: The warnings, cautions and instructions provided in this manual must be read, followed, and kept available for consultation at all times. Observing the information, instructions and procedures presented throughout this manual is essential for using this product both properly and safely. SPECIFIC CAUTIONS •... - Page 6 Training This operation manual includes assembly and operating instructions. Operating/assembly questions can be directed to our service department during business hours. User Profile Patient The product (without accessories) shall accommodate patients fitting the following profile: Height: from infant to 74 inches (6ft - 2in) Weight: up to 500 lbs.
-
Page 7: Important Safety Information
Important Safety Information CAUTION: Federal Law restricts this device to sale by or on the order of a physician, sonographer or other licensed professional. Follow the unpacking and assembly instructions document. Before using this equipment, read the entire operation manual carefully. Failure to read the manual may result in user error or injury. -
Page 8: Chapter 1: Introduction
1. INTRODUCTION Intended Use The Sound Pro Combination Table is designed to provide a safe ergonomic environment for the sonographer and patient. The design features are intended to relieve musculoskeletal stress on the sonographer while scanning, and to provide the utmost patient comfort. Indications for Use The Sound Pro Combination Table is typically used in radiology departments, diagnostic imaging centers and private practice clinics to achieve quality images for a variety of procedures and... - Page 9 Table Parts and Adjustments Figure 1. The Sound Pro Combination Table parts and adjustment include: Standard Parts and Adjustments: 1. Fowler Back 2. Cardiac Scanning Cutout Cushion 3. Side Rails, Folding 4. Restraining Strap 5. Extra-Wide Tabletop With 500-Lb Patient Capacity 6.
-
Page 10: Chapter 2: Assembly And Table Operation
2. ASSEMBLY AND TABLE OPERATION Relocating The Table CAUTION: Before moving the table with a patient, make sure side rails are in the up position and restraining straps in place to secure the patient. This table can be easily moved across smooth surfaces. To move the table, release the central locking system by pressing with your foot on the short end of the central locking lever. -
Page 11: Fowler Back Adjustment
Fowler Back Adjustment The motorized Fowler back is infinitely adjustable to 80° via the hand-held or foot controller. Leveling The Table The table has a self-leveling feature which can be used when the table is in a seated position. • To level the table, press and hold both Fowler back buttons on the hand-held control. Adjustable Sonographer Cutout Cushion To assure patient and sonographer comfort, the adjustable sonographer cutout cushion can be fully lowered, or raised to either of two positions. -
Page 12: Installing And Using Accessories
Installing and Using Optional Accessories NOTE: The tools needed to install all table accessories are provided with the table. These include a 7/16" wrench, a 9/16" wrench and a Phillips screwdriver. Foot Controller (058-741) The foot controller uses three separate rocker style pedals to control tabletop height, Trendelenburg and Fowler positioning. -
Page 13: Articulating Scanning Arm Board
Articulating Scanning Arm Board, (058-736) The optional Articulating Scanning Arm Board is installed by inserting the arm board tube into the receiving tube located on each side of the table below the Fowler back section. The arm board pivot is adjustable at any point along its 130° arc. To adjust, press the yellow button on the arm board and move to the desired location;... -
Page 14: Side Rails
Side Rails (058-633) The optional side rails can be installed on both sides of the table. Each rail pivots individually to either the raised or lowered position. Two rails are supplied: one for each side of the table. To install the side rails: 1. -
Page 15: Headrest
Headrest (058-738) The optional headrest is removable and adjustable. To install the headrest, simply slide it into the receiving tube at the head end of the table until it clicks into place. Figure 9. The optional headrest. Push to adjust angle. Push to release. -
Page 16: Paper Dispenser
Paper Dispenser (058-611) Manufactured to accommodate a roll of hygienic table paper (sold separately,) the paper dispenser is mounted to the head end of the table. Installing the paper dispenser: 1. Raise the Fowler back section of the table completely. 2. -
Page 17: Retractable Stirrups
Retractable Stirrups (058-652) A set of sturdy retractable Stirrups can be neatly concealed in the table frame beneath the abdominal (seat) cushion. The two stirrups are interchangeable and can be mounted in either stirrup housing. To access the stirrups: 1. Lower the drop-down leg section. 2. -
Page 18: Pole
I.V. Pole (058-737) The I.V. pole must be installed on the patient's right side of the table. Installing the I.V. pole: 1. Using a 7/16" wrench, remove the two 1/4-20" hex head screws from the end of the tabletop frame on the side of the table to which the I.V. pole will be installed. 2. -
Page 19: Appendix A - Specifications
APPENDIX A - SPECIFICATIONS Dimensions: Overall: 71" l x 30" w (180.3 x 76.2 cm); 35" w (88.9 cm) with optional side rails Cardiac Scanning Cutout: 9.5 w x 15.75 l (24.1 x 40 cm) Drop-down cushion releases from either side of the table. Sonographer Cutout: 8"... - Page 20 7 Vreeland Road, Florham Park, NJ 07932 (800) 631-3826 | (201) 825-9500 | www.biodex.com...
Need help?
Do you have a question about the BIODEX SOUND PRO 058-710 and is the answer not in the manual?
Questions and answers