Beko HII64401SMTX User Manual page 23

selected hob zone. >>> Center the hob
zone by choosing a pot that is wide
enough for the hob zone.
The cooling fan continues to run even
though the hob is turned off.
• This is not an error. The cooling fan con-
tinues to operate until the electronic
equipment in the hob falls to the appro-
priate temperature.
Noise from the hob during cooking
• Some sounds may be heard from the hob
while cooking. These sounds are due to
the composition of the cooking vessel.
These sounds are normal, they are not a
malfunction and they are a part of induc-
tion technology.
Possible noises and reasons
• Fan noise: The cooker is equipped with a
fan that activates automatically accord-
ing to the temperature of the appliance.
Error codes/reasons and possible solutions
Error codes
E 2
E 22
E 26
E 46
E 47
E 1 – E 15
E 16 – E 21
E 23
E 24
The fan has various operating levels and
operates at different levels as per the
temperature.
• Lower buzz like the operating noise of
a transformer: This is due to the nature
of the induction technology. As the heat
is transmitted directly to the base of the
cooking vessel, such buzz sounds may
be heard as per the material of the cook-
ing vessel. Thus, different noises may be
heard with different cookware.
• Cracking noise: The reason of this is the
structure and material of the base of the
cooking vessel. A cracking sound may be
heard if the cooking vessel is made of
various layers with different materials.
• Whining noise: A whining sound may be
heard when two cooking zones on the
same side of the cooker are used to cook
with different cooking levels.
Error reasons
Communication error between Dis-
play and Knob Interface board
Induction hob is overheated.
One or more keys are kept pressed
for more than 10 seconds.
An object is left on the control panel
or the control is exposed to vapour.
A pot suitable for induction heating is
not used.
Communication error on induction
hob.
Temperature sensor error on induc-
tion hob.
Software error on induction hob.
EN / 23
Possible solutions
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed
Turn the induction cooker off and
wait until it is cooled down. The error
shall be resolved when temperature
of the hob comes down below the
limits.
The problem shall be resolved when
you remove your hand from the hob.
The problem shall be resolved when
the control panel is cleaned.
The error shall be resolved when a
pot suitable for induction heating is
used.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
EN
PL
ET
HR