Administrator password: This command line is used to set the superuser
password.
User password: set the password for regular users.
Note: The password must be a minimum of 3 characters and a maximum of 20
characters. In case of a forgotten password, short-circuit the JCMOS pins for 5
seconds or remove the BAT1, short-circuiting the positive and negative terminals
for 5 seconds to clear the password.
Secure Boot menu
4.7 BOOT
Setup Prompt Timeout: Self-check interface stay time settings
Bootup Numclock State: Option to turn on the Num Lock light upon startup
Quiet Boot: this project allows you to display the supplier logo on the startup
screen.
16
13.3inch e-Paper (K)
User Manual