Yamaha RX-V2400 Owner's Manual page 70

_ _RX-Y2Ai_31,L ]iN.b_ok _gc 66 'lhm-sd_y, J_J_, 3 2003
I ] :20 AM
a,,_l_g*ltflxllllttl_ll:lttll_.zl-'|li#ltt,,_
• Clearing a learned function
You can clear the function learned in a certain
programmed t_utton in each area.
1
Press an input selector button to select the
source component containing the function
you want to clear.
l'he selected compenent name appe_e's in the displ_
window,
•-_ NlaH rain
2
3
Press LEARN using a ballpoint pen or similar
object.
"LEAIZJN" and the selected eompenent name appear
alternately in the display window,
Nl m111| I I N
NI miKIIN N
_ IlltlIB ilZ E
Complete each _ffrk_efollowing steps in 30 seconds.
Otherwise the learning mode will be aL_torfmficNlycanceled.
N r.his ca_s_,p_ss LEA_IN again,
Press and hold CLEAR using a ballpoint pen
or similar object, then press the button you
want to clear for about 3 seconds.
"(':OK" appe_e's in the displ_ window.
• Clearing a macro function
1 Press MACRO using a ballpoint pen or a
similar object.
|m E_ R m! M= m
|m |ill I! NI _IE
2
Complete coachof tire 1%flawing steps in 30 seconds,
Otirerwise the learning mode will N. _ a_tomatDN ly c_r_cele_l.
N this case, press MACRO again.
Press and hold CLEAR using a ballpoint pen
or similar object, then press the macro
button you want to clear for about 3 seconds.
"(':OK" appears in the display window,
i
0000@_
When yol.1 ele_e" macro, the bl.ltt on l"evtr_8 to the
t'act_ 3 setting,
Repeat step 2 to clear other macro functions.
4 Press MACRO again to exit from the clearing
mode.
t
When you clear a 1era-ned function, the bmxon :reverts
to the fact_ setting (otto the manufacturer setting if
you have set manufacturer e_es),
4 Repeat step 3 to clear other learned
functions.
Press LEARN again to exit.
66