Yamaha Natural Sound AV-75PRO Owner's Manual page 8

LD/Video disc player
Connect the video output jack from a LD player or a video disc player to
the LD (VIDEO SIGNAL) jack.
Connect the audio output jacks from а LD player or a video disc player `
to the LD BER SIGNAL) jacks.
Tuner |
Connect the output jacks of the tuner to the TUNER jacks.
Tape deck |
Connect the cable from an audio tape deck or other audio tape unit to
the TAPE jacks. The playback (LINE OUT) jacks of the audio tape deck
go to the TAPE PB jacks, and the record (LINE IN) jacks go to the REC
OUT jacks on ne rear pane! of this unit.
VCR (Video cassette recorder)
Connect the video jacks of the VCR to the VCR (VIDEO SIGNAL) jacks `
on the rear panel of this unit. The video playback (VIDEO OUT) jack of
the VCR goes to the IN jack, and the video record (VIDEO IN) jack goes
to the OUT jack.
Connect the audio output jacks of the VOR to the VCR (AUDIO SIGNAL)
jacks. The audio playback (AUDIO LINE OUT) jacks of the VCR go to the
TAPE PB jacks, and the audio record (AUDIO LINE IN) jacks go to the
REC OUT jacks. |
Monitor TV
Connect the video jack from a monitor to the MONITOR OUT Jack.
Note that the audio connections to fhe monitor are not necessary as the
audio portion cf the signal is sent to your speakers through this unit.
OTHER REAR PANEL CONNECTIONS
_ ACCESSORY (SEND/RECEIVE) jacks
For extra system flexibility, this unit allows you to connect a signal
processing system, such as a graphic equalizer or other equipments.
To connect these units, pull out the jumper pins from the ACCESSORY `
(SEND/RECEIVE) jacks, connect the inputs of the unit to the RECEIVE
jacks and outputs to the SEND jacks. |
REMOTE CONTROL CONNECTOR (PHONO)
Г you have a YAMAHA turntable (with the 28 mark), connect it to this
connector by using a remote control cable: | ши
This connection allows you to control it from the еп remote control
transmitter.
AC OUTLETS (3 SWITCHED OUTLETS)
Use these to connect the power cords from your components to this unit
The power to the SWITCHED outlets is controlled by this unit's POWER
switch or remote control transmitter's POWER key. They will supply power
to any component whenever this unit is turned on.
The total maximum power that can be connected to the SWITCHED
outlets is 100 watts.