Yamaha Natural Sound AV-75PRO Owner's Manual page 11

TO PLAY A PROGRAM SOURCE
‚ Set the VOLUME control to minimum.
. Press the POWER switch to switch the power ON.
. For video sources, turn the TV/monitor ON.
+ © ND —
selector. When selecting LD, TUNER, CD or PHONO, be sure that
TAPE MONI and VCR MONI are not being pressed.
5. Play the program source.
` 6. Adjust the VOLUME control.
Note
ө if both LD апа TAPE MONI are selected, the LD video signals will be
output to the MONITOR OUT jack.
e Па LD player (or video disc е IS playing, its video signals are
being output to the MONITOR OUT jack regardless of which input
selector (except VCR MONI) is ae
For details of the surround mode, refer to "USING THE SURROUND-
SOUND PROCESSOR',
TO RECORD A PROGRAM SOURCE TO AUDIO/VIDEO TAPE
| Sel the VOLUME control to minimum.
2. Press the POWER switch to switch the power ON.
3. Select the program source to be recorded with the input selector.
When selecting LD, TUNER, CD or PHONO, be sure that TAPE MONI
and VCR MONI are not being pressed.
4. Play the program source to be recorded and set the tape deck or
VCR used for recording to the RECORD mode. |
5. By pressing the input selector for tape deck or VCR used for
recording, you can monitor the audio or (and) video signals to be
recorded.
The settings of the SURROUND processing mode controls, the VOLUME
control, the tone controls, etc. do not affect the recording.
+ Ç Мо —
‚ Select the program source to be listened to or watched with the Sci |
TO DUB AUDIO SIGNALS FROM А МСН TO AN AUDIO ТАРЕ
‚ Set the VOLUME control to minimum.
. Press the POWER switch to switch the power ON.
. Press the VCR MONI input selector. |
‚ Set the VCR to the PLAY mode and the tape deck to the RECORD
mode.
You can monitor the audio = dina to be recorded, by pressing the
TAPE MONI input selector.
Note
е It is not possible to dub from the audio tape deck (TAPE MONI) to the
VCR (VCR МОМ). |
® The settings of the SURROUND processing mode controls, the
VOLUME control, the tone controls, etc. do not affect the dubbing.
INPUT SOURCES ORDER OF PRIORITY
When selecting two or more program sources at the same time (by using
inout selectors), be sure to remember the order of priority of the input
SOUICES. |
Audio sources order of priority: 1) TAPE MONI, 2) VCR MONI and
3) LD, TUNER, CD ог PHONO.
Video sources order of priority: 1) VCR MONI and 2) LD.