Yamaha Natural Sound AV-75PRO Owner's Manual page 16

TO PROGRAM SIGNALS FROM OTHER REMOTE-CONTROL
TRANSMITTERS
Before programming |
e Some learning keys are larger than others, but all keys are potentially
capable of the same functions if so programmed. `
Keys should be programmed and used according to their positional
convenience. |
e Use the included seals to indicate the functions for which learning keys
have been programmed. |
It is recommended that you first determine the best and most
convenient layout of the keys for the various functions you plan to
program (and attach the seals accordingly), and then program the keys
corresponaingly. |
_ Follow the steps described below to program signals from other
16
remote-conirol transmitters to this unit.
1. Set the LEARN-NORM switch to the "LEARN" position. `
RESET LEARN NORM
© ©
«ип
LEAANEG ERROR
в Е
2. Position this unit and the other remote-control transmitter head to head.
About 3 = 10 om See
Other
remote-control
transmitter
3. Press the learning key (or programmable preset learning key) оп this `
unit to which the programming will be made.
* H the pressed key is unprogrammed, the LEARNED indicator will flash
continuously. If the key is already programmed, the LEARNED indicator
will flash continuously and, at the same time, the ERROR indicator will
illuminate. Then proceed to the next step if you want to change that
4. Press the key (on the other remote-control transmitter) for the function
to be programmed.