Advertisement
NE-972
|
DIGITAL PROGRAMMER CIRCUIT TEST PROCEDURE (For NE-972)
1. Clock Setting
OPERATION
FUNCTION
DISPLAY
Plug the power supply cable into
* Colon starts blinking.
wail receptacle.
Enter time of day (TOD) by tapping
* Numbers tapped are displayed in the display window.
appropriate number pads.
* Colon keeps blinking.
Example : To Set 11 : 25
* Tap 10 min pad once
* Tap 1 min pad once
* Tap 10 sec pad twice
* Tap 1 sec pad 5 times
Tap Clock Pad.
* Colon stops blinking and stays on.
* TOD has now been registered into the digital programmer
circuit and wil! count up by minutes.
2. Time Cooking/Three Stage Cooking
STEP
OPERATION
FUNCTION
DISPLAY
Tap Power Pad.(Exampie
: Tap
* Clock time disappears.
power select pad once for high
* "HIGH" ( Pa ) power indicator fight turns on.
power setting.)
turns
on
Tap Stop/Cancel Pad.
* The display window will show TOD again.
Select "HIGH" { 44 ) power and
set for 5 seconds by tapping the
appropriate pads.
* Clock time Gisappears.
* "HIGH" ( ¢4 ) Power indicator light turns on.
* Display window shows "5".
turns on
Gg
ie
&
(1st stage)
Hit
Set MEDIUM ( <4 ) power for 4
c4 ) power in-
seconds.
¢ First stage cooking time "5" and "HIGH" (
dicator light disappear.
* "MEDIUM" ( <4 ) power indicator light turns on.
* Display window shows "4",
ie turns on
a
(2nd stage)
Set SIMMER ( ¢4y ) power for 1
* Second stage cooking time "4" and "MED" ( <4 ) power in-
minute.
dicator light disappear.
* "SIMMER?" ( wh ) power indicator light turns on.
¢ Display window shows "h 1".
NOTE: When
SIMMER
power is selected, h meaning hour
appears in display window and cooking time is shown
In hours and minutes.
(3rd stage)
T
Pad.
* Oven light turns on.
ss a
ie
* Microwave activity starts.
* Third stage cooking time disappears.
* SIMMER power indicator light stays on.
* HIGH and MEDIUM power indicator lights turn on.
* Turntable begins to rotate.
+ First stage cooking time "5" appears and counts down by
seconds.
* "HIGH" (1st stage) power indicator light begins to blink.
(1st stage)
(2nd stage)
* After completing 1st stage program, oven automatically
switches to 2nd stage.
¢ HIGH (1st stage) power indicator light turns off.
* MEDIUM (2nd stage) power indicator light starts to blink.
* SIMMER (3rd stage) power indicator light remains on.
* Display window indicates "4" and starts counting down by
seconds.
— 44—
Advertisement
