Mount The Base Unit - Petsafe Guardian GPS Getting Started

Mount the base unit

3
After you have set up and tested your fence using the app,
finish your fence setup by wall-mounting the base unit.
First, slide the mounting bracket out of the slot on the back of
the base unit.
4
With the flat side of the mounting bracket facing you, position
the mounting bracket on the wall, at least 5 feet above
the floor and near an electrical outlet.
Make sure the bracket is level, then fasten it to the wall using
the provided mounting hardware. Use both screws and
anchors for installation in drywall; otherwise, use screws only.
Place the base unit on the mounting bracket and then slide it
down to secure it.
5