2 - Unpacking and handling
Opening the packaging
10 | © 2023 ABB | 1SDH001000R0002 - ECN000297030
NOTE: to unpack the circuit-breaker safely refer to the instruction sheet in the zipped
packaging pouch.
The following is the procedure for opening the packaging:
1.
Cut the bands that wrap the packing box. See Figure 6 and Figure 7.
Figure 6
2.
Open the upper part of the packing box. See Figure 8.
3.
Remove the packing box by lifting it upwards. See Figure 9.
Figure 8
Figure 7
Figure 9
Continued on the next page
Management operations
2 - Unpacking and handling
ABB | SACE Emax 2