Related Manuals for Viking DDBF036SSR
Summary of Contents for Viking DDBF036SSR
- Page 1 Viking Installation Guide Free-Standing Refrigeration Side Trim & Grille Installation Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA...
-
Page 2: Installation
Installation Right Panel Right Trim Front Grille Adhesive Tape Screws Left Panel L Bracket Spacer Screws Left Trim Required Components Remove and discard screw and hinge cover. Remove screw on hinge plate. (Repeat if two hinges are used.) Bottom Mount Model Only Bottom Mount Model Only Remove and discard plug button from hole on Remove three screws from mullion area opposite the... - Page 3 French Door and Side-by-Side Dispenser Models only Unplug harnesses on door. French Door and Side-by-Side Dispenser Models only Apply electrical tape to harnesses and ground wire coming from door. French Door and Side-by-Side Dispenser Models only Apply adhesive tape to grille assembly. French Door and Side-by-Side Dispenser Models only Remove ground screw from hinge on door.
- Page 4 Bottom Mount Model only Position spacers included in the kit on the non-hinge side over the exposed hole from step one. French Door and Side-by-Side Dispenser Models only Connect wire harness to wire harness in cabinet. Connect ground screw. Secure wire harness to top of the cabinet with a piece of tape.
- Page 5 Shim trim has adhesive backing on both sides. Remove adhesive Remove adhesive backing for the side trim. Locate the backing on refrigerator side only. Fit the shim trim to the front of the top of the side trim with the top of the grille assembly.
- Page 8 Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-VIKING1 (845-4641) or visit the Viking Web site at vikingrange.com (PS0605VR) F20426...