Advertisement
12
Position spacers included in the kit on the non-hinge
side over the exposed hole from step one.
French Door and Side-by-Side Dispenser Models only
14
Connect wire harness to wire harness
in cabinet. Connect ground screw. Secure wire harness
to top of the cabinet with a piece of tape.
16
Secure the grille brackets to the holes in the hinge plate.
Bottom Mount Model only
Feed wire harness and ground wire through the bottom
of the endcap and out through the hole in the rear of
assembly down so the adhesive adheres to the cabinet.
Align grille assembly to front door and position grille
C
Raise the unit up until the measurement from the floor
to the top of the grille assembly is 72 inches or 6 feet.
4
French Door and Side-by-Side Dispenser Models only
13
the grille.
French Door and Side-by-Side Dispenser Models only
15
Remove adhesive backing. Firmly press the grille
on top of unit.
17
2
1
7 2 "
Advertisement
