Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Heinzelmann CHEF-S2
Summary of Contents for Heinzelmann CHEF-S2
- Page 1 INSTRUCTION MANUAL HMCS02 Ver202311...
-
Page 2: Instructions For Safe Operation
Congratulations on the purchase restaurants, hotels, offices, and of your new “Heinzelmann CHEF-S2” companies. Sous-Vide . For a safe handling of the product Instructions for safe operation and to get to know the entire scope •... - Page 3 The wall socket must continue Heinzelmann CHEF-S2 to be easily accessible after the • … before you clean the appliance is plugged in, in case Heinzelmann CHEF-S2 and of emergency the appliance can • … be unplugged immediately. during thunderstorms.
- Page 4 • appliance yourself. case 2. Precautions malfunctions, repairs to be conducted by qualified • Operate the machine according personnel only. to the user manual only, otherwise • Failure follow these the machine may be damaged. instructions could cause a risk •...
- Page 5 3. Technical Parameters 4. Product Function Rated voltage : 220 - 240 V 60.0 ° ° 60.0 TEMP Rated frequency : 50 HZ TIME 1. Power Rated power : 2300 W • When the power is plugged in lights up. •...
- Page 6 again to enter the setting state Reset to default : • In the working mode, press and Under the ready working mode, long press and “+”, the Display (A) hold the button, the displays will display the setting temperature show the time and temperature 60°C, the Display (B) will display that have been set.
- Page 7 “+” and “-” keys. After the setting is completed, press to start the CHEF-S2. Control Panel Upper Cover When temperature reached, the machine will beep, Main Body (upper) now put the food in vacuum...
- Page 8 machine performance, Note: please remove the low part of the machine’s housing (Please • The water level (after the food refer to “How to Disassemble”) to is put in) should be higher clean the heat tube and probe .it than the “MIN”, but lower than is better to clean every 20 times the “MAX”...
- Page 9 Do not use hot machine in cool water. Cool down the machine to Remove the lower casing of room temperature and put into machine(Please refer to the page cool water to use. Otherwise it will EN-07 “How to Disassemble”), influence the machine function use the clean water to clean the and lifetime.
- Page 10 9. Troubleshooting Error code Cause of issue Troubleshooting Turn off the machine power: If The water level is lower the water level is too low, add than the lowest water the right amount of water to the level or higher than the container;...
Need help?
Do you have a question about the CHEF-S2 and is the answer not in the manual?
Questions and answers