Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Heinzelmann CHEF-X HMCX02
Summary of Contents for Heinzelmann CHEF-X HMCX02
- Page 1 INSTRUCTION MANUAL HMCX02 Ver202206...
-
Page 2: Safety Instructions
To guard against accidental Congratulations on the purchase of your new dropping of the mixing blade set, “Heinzelmann CHEF-X” Thermo Mixer. be careful when dismounting it. For a safe handling of the product and to get to Be careful if hot liquid is poured... - Page 3 Prior to replacement of parts or Never touch the appliance or the attachments which move when in plug with wet or damp hands. operation, the appliance must be switched off and disconnected. DANGER! Risk of electric shock Turn off the appliance before pulling the plug out of the socket.
- Page 4 (gasoline, Heinzelmann CHEF-X, electric, charcoal cooker, etc.) … before you assemble or Keep the appliance away from disassemble the Heinzelmann any hot surfaces and open CHEF-X flames. Always operate and … before you clean the place the appliance on a...
- Page 5 Never overfill the blender bowl or the contents might be ejected. Overflowing liquid would flow onto the surface. You should therefore place the appliance on a waterproof surface. Ensure that during steaming, there is never too much or too little water in the appliance.
-
Page 6: Intended Purpose
2. Intended purpose Heinzelmann CHEF-X is used to mix, emulsify, grind, homogenize, cream, infuse, puree, whip, whisk, beat, stir, chop, mash, stew, brown, and cook. These user instructions describe the basic functions such as mixing and chopping. WARNING! Risk of material damage! Do not use the appliance to chop hard food such as bones or nutmegs. -
Page 7: Items Supplied
Warranty Please scan the QR code or visit https:// www.heinzelmannpro.com/en/product- registration for product registration. Heinzelmann CHEF-X comes with a 12-month warranty against manufacturing defect, excluding naturally normal wear and tear, and provided the appliance has been used and maintained in accordance with the instructions... - Page 8 7.3 Operation Button / Function Notes Component Connecting to the Machine is in stand-by mode when red Press |9 to switch on the machine. power supply LED lights up. The appliance is ready for operation Select a desired function to start the when green LED lights up.
- Page 9 Press to activate and press again to de- activate. Temporary stop of speed, heating and timer. Wait for the LED light above pause to turn GREEN and acoustic signal before Lid can be opened after acoustic signal opening the lid. sounds.
- Page 10 7.4 Setting the temperature If count down function is not used, the display Turn the temperature control |7 to set the cooking can show up to 90 minutes for counting up temperature: purpose. The adjustable temperature ranges from 37 During operation, the set time can be °C to 130 °C.
- Page 11 7.8 Turbo function 7.10 Pause Once turbo button is pressed, speed is increased Press Pause to temporarily stop the operation for to maximum speed. checking or adding ingredients. Only open the lid when the LED above pause button turns GREEN CAUTION : and a sound appears.
- Page 12 CAUTION: Position the blender bowl |1 horizontally. When mixing liquids at speed 10 or with 2. Press the unlocking lever |25 on the underside button Turbo |11, the blender bowl |1 must not of the blender bowl |1 so that it points to the contain more than 1 litre, otherwise liquid may open lock symbol.
- Page 13 The wings of the whisk |19 are located in the NOTES: space between the blades. To remove the In order to facilitate the closing of the lid whisk |19, pull it out upward. somewhat, put a few drops of oil on a cloth and rub it on the seal |21.
- Page 14 4. Close the blender bowl |1 with the lid |22 and NOTE: the transparent lid cap |23. Certain food or spices (e.g. curry) may 5. Use the timer |14 to set the desired time. discolour plastic parts. This is not a defect with 6.
-
Page 15: Maintenance
3. Insert the cleaned seal or a new one. 2. Fill this mixture into the blender bowl |1 or put 4. Before using the appliance again, reinsert the other furred-up parts into a container with this blade assembly |17. mixture. 3. -
Page 16: Troubleshooting
11. Trouble shooting 11.1 Malfunctions during operation Malfunction Cause Remedy Blender bowl |1 is not positioned Insert blender bowl |1 correctly (see correctly “8.3 Insert the blender bowl”). Lid |22 has not been placed Appliance does not start Place lid |22 correctly. correctly onto the blender bowl |1. -
Page 17: Discarding & Environment
11.2 Warning messages on the display Display Cause Remedy Lid Opened Lid |22 have not been placed Close lid |22 correctly (see correctly onto the blender “8.5 Put on the lid of the bowl |1. blender bowl” ). Lock in Red Lid was opened during Security unit in lock down for operation or without... -
Page 18: Technical Specifications
13. Technical specifications Model: HMCX02 Voltage: 220 -240V ~ Frequency: 50/60 Hz Protection class: 1300W Power rating: (Motor: 1400W, Heating: 1050W) Capacity of blender bowl |1 2 litres Subject to technical modification. 14. How to order accessories On our website you can find information regarding accessories and spare ports that can be reordered shop.heinzelmannpro.com Scan the QR Code or Visit here www.heinzelmannpro.com/en/manual to view...
Need help?
Do you have a question about the CHEF-X HMCX02 and is the answer not in the manual?
Questions and answers